Posts Tagged ‘Ionways ionizer’

IonWays Athena, ISIS, Venus and Delphi Ionizer Water Filter Replacements

Courtesy IonWays flow. Vol. 1, Issue 2.

One of the more common calls our Technical Services Department receives starts something like: “I think I was sent the wrong filter!”

IonWays ionizers are sent with standard blue-gray colored filters.These are much different from the New and Improved Sediment filter and BioStone Plus replacement filters, which are an environmentally friendly, unpigmented filter, and a tad bit bigger. We’ve made a lot of improvements to these filters, especially the Biostone Plus, which is now designed not only for the reduction of chlorine and disinfectant chemicals, but also for chloramines and heavy metals!

Installing these filters is quite a simple process:

Step One: Open appropriate filter door. Filter 1 (left side)-Sediment Filter, Filter 2(right side)-Biostone Filter.

Step Two: Press straight down on top of the filter to release it from the top housing. Once it’s clear, you can lean the filter out and away from the machine to remove.

Step Three:
Athena/Delphi replacement: Remove filter cup from ionizer (sometimes the cup will come out attached to the filter). Install the new filter along with the enclosed, modified filter stand by inserting into ionizer. For easy installation, we recommend you insert the modified filter stand into the bottom of the filter first and then insert the entire filter unit into your ionizer. Note: The filter stand is only necessary for ionizers sold before August 2009.

Isis replacement: Install the new filter by inserting into ionizer. Note: The Isis does not require the modified filter stand for installation, so it should be removed from the filter prior to installation. Once the filter is placed, spin/rotate it a few times in each direction to ensure a good seal on the O-rings.

Step Five: Turn on water and allow it to flow through the ionizer for a couple of minutes. This will purge out any carbon dust or mineral particles commonly found in all new filters. This step is recommended for all new filters.

Installing an IonWays Ionizer

by Joseph Stumph

When installing an IonWays ionizer in one of today’s modern kitchens, one of the most difficult obstacles to overcome is the pull-out, spray-style faucet. These newer model faucets are so convenient that I’m sure they’ll be around for a good long time.  With a little know-how and a few different options, an ionizer can be installed in your kitchen no matter what type of faucet you have-even the difficult pull-out, spray-style…

The first option (and my personal favorite) is to install a connection directly to the cold water line. There are several different adapters and fittings to make the connection and these are widely available at most hardware stores. This option leaves the spray attachment intact and operational.  It also frees an expensive and nice-looking faucet from a diverter valve hanging off its side. This option requires that you find a clear path to the ionizer from under the counter top. I have drilled a ¼” hole through my counter where the back splash meets the top-it’s so small that you have to look hard to even notice it. You could even run the hose right up next to your soap dispenser-where there’s a will, there’s a way!

Also available with the Athena or Isis is the option of installing an under sink kit. All you’ll need is a 1½” hole drilled through the sink or counter top. Standard plumbing fixtures use the same size hole, making it easy to slip the kit’s faucet right in through a pre-drilled soap dispenser or accessory hole.

If you’re planning to hook your ionizer to your pull-out, spray-style faucet with a diverter, you’ll need a special adapter because the aerator is recessed into the faucet and needs an added extension to make a diverter valve fit. In order to find this adapter, it’s important that you know exactly what to call it, “15/16, 27 thread male adapter for speakman style.” Because the part can be difficult to find and is not always available at your local hardware store, you may need to order it through the Internet. Using the exact words noted above, you can do a Google search and find several places selling the adapter at an average cost of four dollars.

I was selling the wrong alkalizer, ionizer, or alkaline water machine!

Let me set the scene for you: After 6 years in this business, I finally realized I was selling the wrong alkalizer, ionizer, or alkaline water machine!  Whatever you want to call it!

People are trying to make sense of the massive piles of hype still being disgorged by the Internet marketing alternative health community…

… and how all that hype soured good people on good opportunities.

“Hype”, and the dreadful sales pitches filled with it, really confuses people.  To the point where it’s now cool to talk about “selling without selling”.  I say “Bull Sugar!”

It’s clear that many people now struggling to make a business successful…

… feel adrift in all the advice, information, and teasing opportunities swirling around the marketing community, both online and offline.

I know it’s frustrating.  I hear about this frustration all the time.

Thankfully there is a company that cuts through all the Bull Sugar on the Net…

… all we need to do is spend a little time learning and get the information out…

… oh, and personal experience with the product is the best way to share with people.

Yes, I knew if I was going to be successful, I needed their product in my home so …

… I purchased the Athena and put my old ionizer to rest.  What a difference in taste, pH, and ORP!  I couldn’t believe it!  I absolutely love this machine!

Now … Let’s not let grass grow under our feet.

==================================================

As you may or may not know, on March 25th, 2010, I visited corporate headquarters for IonWays in Reno, NV.    To say the least, I was very impressed. My sponsor/business partner Kai Jacobson was instrumental in allowing me to visit and meet the owners and employees of the company that day.

I met and spent a good amount of time talking with Jay Hare, the CEO, David Forsythe, the Owner, Rick Wright, the COO, and Joseph Stumph, the Technical Service Manager.  IonWays, LLC has 25 employees, many are bilingual, and very intelligent.  I mention bilingual because IonWays is expanding worldwide.

Currently, IonWays, LLC are in US, Canada, and Ecuador.  Brazil, UK, and other parts of the world are opening up this year.  It’s very important to understand the management team (IonWays Management Team)  is preparing for the big explosion of business to begin happening and they will be able to keep up with business and they want people who speak their languages employed into key positions.  The site and all materials are already in Spanish and other languages are on the way.

This company has done it’s homework.  The corporate structure, customer service, and high quality machines with a lifetime warranty, 20 PHD R&D scientists earning over 22 patents for their machines, UL Certified, high quality filtration system, ISO 9001 and ISO 14001 certified are just a few of the reasons I really support this company.  (IonWays and Emco Manufacturing)

If you haven’t done so, look on DEALER RESOURCES, see the certified documents, watch the videos, see the filtration system that can go as low as .10 micron and as low as .01 micron.  Same as a dialysis machine!  It’s really a proven machine.  Plus a Lifetime Warranty on all the machine.  The IonWays site as well as the back office materials explain all of that.

You see . . . we don’t need hype with IonWays . . . their products, manufacturing, scientific evidence, and certifications are visible for people to see.  It’s as if a breath of fresh air has entered the room . . . or a tidal wave of reality not hype!

If you haven’t yet . . . you’ll need to, is to get this ebook I have created.  It’s 80 pages!

Almost Everything You Ever Wanted to Know About Ionized Alkaline Water

I look forward to helping you!

Brad Hamilton

408-782-4681