IS More Always Better?
This isn’t a trick question…if you were asking someone about money then I’m sure everyone would say, “YES”! 
My question pertains to plates found in all Ionizers except The Alkalizer, of course!
What is the difference between electrodes and plates? There is a big difference because they do not do the same thing.
The electrodes help with the electrolysis process separating the negative minerals (good) from the positive minerals (bad). There are three electrodes and three panels in the Alkalizer. The Alkalizer’s electrodes are built into the panels which are double coated titanium/platinum and cooked on which aides in lowering the ORP, adding millions of negative electrons into the water, and restructuring the water.
The Alkalizer does not have plates, they have large panels…here’s why.
There is a big defect with high number of plates…for example let’s say five plates like one of our competitors. If there are more than three, the other plates do not even get used. Three of the five plates will collect a lot of hydrogen gas at the top of the electrolysis chamber and the water will disappear and lower in the chamber. When the water disappears or lowers the electrolysis will not touch those other plates. The machines with 6 or 7 plates, the same thing will happen causing the machine not to function properly and not have a low ORP and affects the pH.
The Alkalizer has a special patented process and has three filter panels, instead of plates, which help produce the best of all restructured alkaline water. The Alkalizer is the ONLY machine that has two responses to process the water.
1. First response: It measures for pH 9.0 water when it is hooked up. You will see the lights going up and down until it reaches that pH.
2. Second response: It allows you to manually choose the particular level of pH for your present needs.
Since 1995 in the industry, DBS has brought over many other Ionizers and tested them in the cities and on many different water sources. Again, The Alkalizer has patented panel process superior to plates. One of the problems found in plates was in just a short time, 8 to 18 months, there were pin holes in the plates from wear and tear which will diminish the ability of ionization in the processing of water. This results in a high ORP and costing the customer money and health.
The Alkalizer will NEVER have pin holes in the plates because it has 3 Large PANELS and they are extremely smooth. It’s the only commercial machine built for residential and commercial use. David, the president of the company has been to Japan and visited NIMO Corporation and validated their quality and control. Just as important is the longevity of the product and that is why we have a 5 year warranty.
You can read more about The Alkalizer here: www.AlkalizerH2O.com/shop
Warmest regrads,
Brad Hamilton